|
|
Build Your Online Product Catalogs?
| Product Name: |
Rubber Track 300*52.5*80 for Komatsu Excavactor
|
| Supply Ability: |
500,000 |
| Related proudcts |
rubber track, rubber crawler, excavator track, |
| Specifications |
300*52.5*80 |
| Price Term: |
FOB |
| Port of loading: |
Shanghai port |
| Minimum Order |
2pcs |
| Unit Price: |
USD347 |
|
The characteristics of rubber tracks&©|160;
1. Rubber tracks cause less damage to roads than steel tracks, and less rutting on soft
ground than steel tracks&©|160;
2. A benefit to equipment operating in congested areas, rubber tracks make less noise than
steel tracks&©|160;
3. Rubber tracks permit machines to travel at a higher speed than steel tracks&©|160;
4. Rubber tracks insulated machine and operator from vibraion, exteding the service life of
machine and decreasing operator's fatigue&©|160;
5. The ground pressure of rubbr tracks equipped machinery can be fairly low, about 0.14-2.30
kg/m2, a major reason for its use on wet and soft terrain.&©|160;
6. The added traction of rubber tracked vehicles permits them to pull twice the load of wheeled
vehicles of the same weight.&©|160;
7. Rubber tracks' pulling performance being twice that of wheels, it permits the lighter vehicles
equip with rubber track to do the same pulling work than that of wheeled vehicles.&©|160;
The notices of using rubber tracks&©|160;
1. Adjust the tension of the rubber crawler so that the height, the variable range is 10-20mm
when the machine is lifted. Readjust when the tension decreases. (Be careful because the
rubber crawler may come off if the tension is too low).&©|160;
2. Avoid projection from the frame around the rubber crawler, especially on its inner
circumference. (Rubber crawlers are easily deformed; If it comes into contact with the frame,
an accident such the rubber being cut can occur).&©|160;
3. Avoid sharp projections when traveling.&©|160;
4. Avoid turning too fast on concrete roads with a high coefficient of frction because this can
cause accidents such as cutting the rubber.&©|160;
5. Be careful that no oil, etc adheres to the rubber track. If it does, wipe it off immediately.&©|160;
6. When storing for long periods, keep indoors, away from direct sunshine and rain.&©|160;
7. Replace as soon as possible when abrasion of sprockets is observed&©|160;
We a |
| Company: |
Shanghai Puyi Industrial Co., Ltd
|
| Contact: |
Ms. Grace S |
| Address: |
NO. 3585 FENGZHE ROAD |
| Postcode: |
|
| Tel: |
862137580296 |
| Fax: |
02137580295 |
| E-mail: |
|
|
|
|
Home
